Freight visibility
Freight visibility for brokers, carriers and 3PLs
Freight visibility is knowing where every load is, how old that position is, and whether the truck will make its next appointment, while there is still time to act. A map of dots covers the first part. LoadSignal watches every load, follows up with drivers by your rules, and puts the loads that need a person at the top of the queue.
What freight visibility means for a broker
Most of what is written about freight visibility is written for shippers: inventory across ocean, rail and truck, one control tower over every partner. A broker's version is smaller and harder. The truck belongs to a carrier you booked yesterday. The driver works for someone else and owes you nothing beyond the rate confirmation. And where the position comes from gets settled again on every load.
So for a brokerage, visibility comes down to three questions per load. Is there a position at all? How old is it? And does it still add up to the appointment? The customer asks the third one, usually by email.
Three terms, three jobs
The words get used interchangeably. They describe different work, and most tools cover only one of them.
| Term | The question it answers | Usually owned by |
|---|---|---|
| Supply chain visibility | Where is my inventory, across every mode and partner? | The shipper |
| Freight visibility | Where is this truck, how old is that position, will it make the appointment? | The broker, carrier or 3PL |
| Track and trace | Which loads need a person right now, and who is doing what about them? | Dispatch, or a track and trace desk |
Visibility software answers the second row. The cost of running a brokerage sits in the third: someone still has to look at the map, notice the truck that has not moved in an hour, call the driver, and write to the customer. Track and trace is that job, and it is the part LoadSignal automates.
Where the position comes from
No single source covers every carrier. A useful visibility setup takes several and picks per load. These are the four LoadSignal uses, and where each one fails.
| Source | What the driver does | How positions arrive | Where it breaks |
|---|---|---|---|
| ELD connection (Samsara, Motive) | Nothing. The carrier approves the connection once. | From the truck's ELD while the load is active. | Only fleets that connect. Reporting depends on the ELD provider. |
| Carrier share link (Samsara, Motive, Nomad ELD, EVA ELD family) | Nothing. The carrier sends a link, or emails it to the load. | Polled every minute while the load is active. | The carrier revokes the link or it expires. |
| LoadSignal Driver app (Android and iOS) | Installs once, accepts the load. | From the phone in the background, subject to its permissions. | The driver will not install it, or turns location off. |
| Browser tracking link | Opens the text and allows location. | While the page stays open. | The phone locks or the browser suspends the page. |
The check call is the fifth source, and the one the other four replace. The question worth asking of any setup is what happens on the load where none of the four is working. More on each: ELD tracking, driver tracking without an app and tracking from a carrier share link.
A position has an age
A dot on a map looks the same whether it arrived thirty seconds ago or three hours ago. That is where visibility usually goes wrong: the screen shows a confident pin, the customer gets an ETA built on it, and the truck has been parked at a truck stop since lunch.
LoadSignal shows every position with its age and its source. A load with no position for 20 minutes is stale, and after 60 it is lost. Those are defaults your organization can change. An ETA reads as current only while the position behind it is, and it is a planning estimate, not a guarantee. A passed appointment with no evidence reads as completion unconfirmed, not late, because nobody knows yet. The ETA guide covers how the estimate is built.
From visibility to automation
Visibility tells you a truck has stopped. Somebody still has to decide whether that matters and do something about it. That decision, repeated all day across the board, is what LoadSignal takes on.
Eleven detectors check active loads on a five-minute schedule and on relevant events: tracking gone stale, a truck stopped mid-transit, off the planned corridor, running at an appointment, a POD missing after delivery, and the rest. When one fires, the Track & Trace Operator acts within the rules you set. It can re-send the tracking link, text the driver for a check-in, or alert the people watching the load, each with an attempt limit. Driver follow-up can run on its own. Customer drafts from the Operator always wait for a person to approve them.
Customer updates are their own switch. Milestone emails at pickup and delivery, and scheduled status emails with a live tracking link, run only after your organization turns them on, drafted for approval or sent automatically, in your own wording.
What your team opens in the morning is a queue, ranked: the loads that need a person, what is wrong with each, and the next action. The loads that are fine stay quiet. Exception management and automated check calls go through both halves in detail.
When a shipper asks for project44
Larger shippers often run their own visibility platform and ask every broker on their freight to feed it. That requirement stands whatever you use internally. If the shipper uses project44, LoadSignal can send truck positions and stop milestones to the shipper's project44 shipment, matched by the order number or BOL the shipper uses. You choose which customers are shared and which updates go out. Until you do, nothing is sent. LoadSignal does not send to MacroPoint or FourKites today.
Where LoadSignal fits, and where it does not
LoadSignal is built for truckload brokers, carriers and 3PLs moving roughly 100 to 2,000 loads a month, who want positions and the follow-up in one place. It works beside your TMS, with connections for Rose Rocket, Turvo, McLeod, Tai TMS and Descartes Aljex, plus the public API, spreadsheets and emailed rate confirmations.
It is the wrong tool for ocean, air or parcel freight, for a shipper that needs one view across every mode and partner, or for a team that needs a large carrier network connected on day one, EDI, or a completed third-party security audit. The enterprise visibility platforms are built for that work. If you are comparing named tools, start with freight visibility software for brokers, which sets out what each vendor publishes. To see it on your own lanes, book a demo.
Questions about freight visibility
What is freight visibility?
Freight visibility is knowing where a shipment is, how old that information is, and whether it will make its next appointment, early enough to act on it. For a truckload broker, carrier or 3PL that means a position for the truck on each load, the age and source of that position, and an ETA compared with the appointment. Visibility software collects those positions from ELDs, driver apps, browser links and carrier share links and shows them against the load.
What is the difference between freight visibility and track and trace?
Visibility is the information: where the truck is and whether it is on schedule. Track and trace is the work done with it: noticing which loads have gone wrong, chasing the driver, and telling the customer. A visibility tool can show a truck sitting still for an hour and still leave a person to notice it. LoadSignal does both: it collects the position and runs the follow-up by the rules your team sets.
How is freight visibility different from supply chain visibility?
Supply chain visibility is a shipper's view across inventory, ocean, air, rail and truck, often across many partners at once. Freight visibility is narrower: one shipment at a time while it moves. For a broker it is usually one truckload, hauled by a carrier the broker does not own, tracked from whatever source that carrier can provide.
Is freight visibility software a TMS?
No. A TMS stores the load: customer, carrier, rate, stops and billing. Visibility software watches the load while it moves. LoadSignal sits beside your TMS and does no billing or settlements. Loads come in from a TMS connection (Rose Rocket, Turvo, McLeod, Tai TMS and Descartes Aljex), the public API, a spreadsheet or an emailed rate confirmation.
Do freight visibility tools replace check calls?
They replace the routine ones. When the position is current and the truck is on schedule there is nothing to ask. The calls that stay are the ones a person should make: the truck has gone quiet, the ETA is past the appointment, or the driver never accepted the load. A tool that finds those loads for you, and by your rules re-sends the tracking link or texts the driver first, is what shortens the call list. How many calls that removes depends on your carriers, so we do not put a number on it.
Does every carrier provide real-time visibility?
No. Some carriers connect their ELD, some send a share link, some drivers install an app or open a browser link, and some do none of these. That is why a visibility tool needs more than one source and a plan for the load where none is working. LoadSignal takes the ELD, carrier share links, its driver app and a texted browser link side by side, and marks a load stale after 20 minutes and lost after 60 without a position, defaults your organization can change.
What does real-time mean for a truck's position?
It should mean the position is recent enough to act on, and the software tells you how recent. Positions arrive at different rates by source: a driver app reports while it is tracking, a browser link only while the page is open, a share link as often as the carrier's provider updates it. LoadSignal shows every position with its age and source, and treats an ETA as a planning estimate, not a guarantee.
My shipper uses project44. Can I still use LoadSignal?
Yes. LoadSignal can send truck positions and stop milestones to the shipper's project44 shipment, matched by the order number or BOL the shipper uses. Nothing is sent until you choose which customers and which updates to share. LoadSignal does not send to MacroPoint or FourKites today.
What does freight visibility software cost?
It depends on the vendor and the model: some charge per tracked load, some a subscription, some an annual contract. LoadSignal has no list price. Each company gets a quote based on its monthly load volume and sees the price before being asked to pay. Contact sales through the demo form.
